Calculated Industries 4088 User Manual page 9

Diameter — Enters a Diameter. Calculates circle
d
Area and Circumference given entered Diameter.
Bolt Pattern — Enters the number of holes in a
gd
Bolt Pattern. Calculates the hole Center-to-Center
Spacing and the x and y coordinates for each
hole in a Bolt Pattern given entered Diameter,
Number of Bolt Holes, Starting Angle (optional)
and Center x and y coordinates.
Material — Scrolls through 20 Material types.
N
Materials are assigned numbers from 1-20,
which can be used to select a particular Material.
Materials are used to determine tabular Feed and
Speed values. See Materials section on page 16
for the complete list of available materials.
gN Depth of Cut (DOC) — Enters a Cut Depth for
use in determining tabular Feed and Speed values,
as well as Material Removal Rate.
Process — Scrolls through six Processes:
P
Used to determine tabular Feed and Speed
values. Assigned number can be used to select a
particular Process.
Width of Cut (WOC) — Enters a Cut Width for
gP
use in determining tabular Feed and Speed values,
as well as Material Removal Rate and Radial
Chip Thinning Adjustment Factor.
Tool — Scrolls through three Tool Types:
L
Used to determine tabular Feed and Speed
values. Assigned number can be used to select a
particular Tool Type.
1. Face Milling (default) 4. Turning
2. End Milling
3. Slot Milling
1. High Speed Steel (default)
2. Carbide
3. High Performance
5. Boring
6. Drilling
User's Guide — 9