Calculated Industries 4088 User Manual page 53

1. If necessary, set the Thread Class to 2A:
2gt* (Thread Class)
* If necessary, continue pressing t until the desired External
Thread Class is displayed.
2. Enter the Thread size:
.375it
3. Enter the Threads per Inch:
4. Enter the Wire size**:
.04gS (Wire size)
5. Enter the 3-Wire Measurement:
.3975gR
6. Find the Pitch Diameter:
**If no Wire size is entered, the calculated Ideal Wire size will be
used to find the Pitch Diameter.
16t
(3-W Measure
R
R
U.s. ext. threaD
2a
threaD siZe
2a
threaD siZe
2a 0.375 - 16 inch
storeD Wire siZe
3-Wire MeasUreD
)
pitch DiaMeter
storeD Wire siZe
User's Guide — 53
2.
0.375 - inch
0.04 inch
0.3975 inch
0.332 inch
0.04 inch