Calculated Industries 4088 User Manual page 65

appenDix c – preference settinGs
The Machinist Calc Pro 2 has Preference Settings that allow
you to customize or set desired unit formats and calculations.
If you replace your batteries or perform a Full Reset* (turn
calculator off, hold down *, and press O), your
calculator will return to the following settings (in addition to
those listed on the previous page), with the default setting for
each preference listed first:
*Depressing the Reset button located above the d key will also
perform a Full Reset.
preference
1) Default Unit
Format Mode
2) Fractional
Resolution
– U.s. MoDe: unitless values
stored within Machinist functions
are automatically assigned the
corresponding default U.S. units of the
selected function.
– Metric MoDe: unitless values
stored within Machinist functions
are automatically assigned the
corresponding default Metric units of
the selected function.
– 1/64:
displays fractional values to the
nearest 64th of an Inch.
– 1/2: displays fractional values to the
nearest half Inch.
– 1/4: displays fractional values to the
nearest quarter of an Inch.
– 1/8: displays fractional values to the
nearest 8th of an Inch.
– 1/16: displays fractional values to the
nearest 16th of an Inch.
– 1/32: displays fractional values to the
nearest 32nd of an Inch.
options
User's Guide — 65
(cont'd)