Numeric Thread Size - Calculated Industries 4088 User Manual

numeric thread size

Enter an 8-32 screw and scroll through the available Internal
Thread (Class 2B) characteristics, then switch to External
Thread (Class 2A) and scroll through the available Thread
characteristics:
Note: The default U.s. Thread Class is 2B (Internal). To view the
current Thread Class, press gt. To change the class, press
t again.
Thread size calculations for Pitch, Major, and Minor Diameter
attributes are compliant with ANsI/AsME B.1.1-2003 and ANsI/
AsME B.1.13M-2005.
1. Verify Thread Class is set to 2B:
gt (Thread Class)
2. Enter the Thread size:
3. Enter the TPI:
4. Find the available Internal Thread characteristics:
g* all cleareD
8t
32t
t
t
t
U.s. int. threaD
2b
threaD siZe
2b
threaD siZe
2b
threaD pitch
tap Drill siZe
#29
roll tap Drill
User's Guide — 43
0.
2.
8 -
8 - 32
0.031 inch
0.136 inch
3.750 MM
(cont'd)