GE N60 Instruction Manual page 215

5 SETTINGS
angles are set identically, except rare applications when the voltage and current measuring points are located at differ-
ent windings of a power transformer.
d) PMU COMMUNICATION

PATH: SETTINGS SYSTEM SETUP
 PMU 1
 COMM PORT 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
This section configures the phasor measurement unit (PMU) communication functions.
• PMU1 COMM PORT: This setting specifies the communication port for transmission of the PMU data.
GE Multilin N60 Network Stability and Synchrophasor Measurement System

PHASOR MEASUREMENT...
PMU1 COMM PORT:
None
PMU1 PORT PHS-1
PMU 1 V1
PMU1 PORT PHS-1
NM: GE-UR-PMU1-V1
↓
PMU1 PORT PHS-14
PMU 1 V1
PMU1 PORT PHS-14
NM: GE-UR-PMU1-V1
PMU1 PORT A-CH-1:
Off
PMU1 PORT A-CH-1
NM: AnalogChannel1
↓
PMU1 PORT A-CH-8:
Off
PMU1 PORT A-CH-8
NM: AnalogChannel8
PMU1 PORT D-CH-1:
Off
PMU1 PORT D-CH-1
NM: DigitalChannel1
PMU1 PORT D-CH-1
NORMAL STATE: Off
↓
PMU1 PORT D-CH-16:
Off
PMU1 PORT D-CH-16
NM: DigitalChannel16
PMU1 PORT D-CH-16
NORMAL STATE: Off
 
PMU 1 COMMUNICATION
Range: None, Network, GOOSE
Range: available synchrophasor values
Range: 16-character ASCII string
Range: available synchrophasor values
Range: 16 alphanumeric characters
Range: available FlexAnalog values
Range: 16 alphanumeric characters
Range: available FlexAnalog values
Range: 16 alphanumeric characters
Range: FlexLogic™ operands
Range: 16 alphanumeric characters
Range: On, Off
Range: FlexLogic™ operands
Range: 16 alphanumeric characters
Range: On, Off
5.4 SYSTEM SETUP
PMU 1 COMM PORT
5
5-85