After Scanning - Shining 3D EinScan-Pro+ User Manual

Handheld Rapid Scan
Delete selected data
Click the button or "DELETE" in the keyboard to delete selected data.
Undo
You can only undo the last deleted data.
Note：
Handheld scan mode does not support the deletion of mark points.
Handheld rapid scan, feature align, use the edit button to delete all the data,
continue scanning will restore the last deleted data.
Show/Hide Stripes
Click the button to switch the texture display and hide. Non-texture scan, there is no
such button.
Finish Scan
Click the button when scanning data is complete to save the data.
Note：
1. When new project choose the high resolution, the slow it saves, please be
patient.
2. After click " Finish Scan"， if you continue to close the program Data loss may
occur. Please wait.
Delete Your Data
Click the button to delete the whole data and restart scanning.

1.2.3. After Scanning

Mesh
When the scan is completed, click the botton, proceed to post-processing. You will see
two modes after clicking the button: Watertight and Unwatertight. Watertight usually
slower than unwatertigt. Texture scan mode will take more time compared to Non-Texture scan
mode.
49