Shining 3D EinScan-Pro+ User Manual page 28

camera viewport. The left camera viewport always display.
Click in the lower right corner of the camera viewport to zoom the camera viewport
Work distance
Adjust the distance between the object and device
until the cross is clearly to be seen on the object.
Adjust Brightness
equipment against objects, the cross is clearly in the brightness viewing window.
Turntable Steps
Align Mode
The default is turntable coded targets align mode，you can also choose
markers or feature align mode. Align mode can be re-selected after the
turntable has rotated one circle.
If you import global markers point file when creating a new project, the align mode is global
mark point, and the project cannot change to other align mode. In the new project interface,
select
Import global mark point. Note：The use of global markers point, the only point in the framework
can scan.
Auto Scan
(suitable working distance is 450 ~
Drag the button to adjust the brightness. The
brightness is appropriate at the right scan distance:
Before scanning, you can set the scan times per round
under turntable scan. The default setting is 8 times.
, can import three formats as asc, txt and p3.
550mm),
27