Table of Contents
Advertisement
(8) DISPLAY
This key is used to switch the data display mode.
You can switch the display mode during free running (when stopped) and data capturing.
Pressing this key switches the display mode as follows:
(9) TIME/DIV
Pressing this key changes the time axis display width.
The following settings are possible.
1, 2, 5, 10, 20, 30sec/DIV
1, 2, 5, 10, 20, 30min/DIV
1, 2, 5, 10, 12, 24, 72 hour/DIV
(10) REVIEW
This key is used to replay captured data.
35
Waveform + Digital Screen
Displays waveforms and digital values.
This is the initial screen at power-on.
Digital + Calculation Display screen
Displays digital values and calculation results in large
text.
Calculation results are added up in real time.
Refer to the User's Manual in the supplied CD-ROM
for more information on the calculation results.
Bar Graph screen
Displays measurement data in bar graphs.
Allows you to select a reference point of a bar graph.
Refer to the User's Manual in the supplied CD-ROM
for more information on the setting.
Advertisement
Table of Contents
