Table of Contents
Advertisement
(4) Direction keys
This key is primarily used for the following operations.
To move a menu or setting item during menu configuration.
To move the cursor during replay.
To move the active channel in the Waveform + Digital screen (
To change the setting of SPAN/TRACE/POSITION (
(5) MENU
Open the settings window to capture data. Pressing this key switches the tab on the settings window.
Refer to the User's Manual in the supplied CD-ROM for more information on the setting.
(6) START/STOP(USB DRIVE)
This key is used in the following two operations:
<Starting or Stopping Measurement>
Pressing this key during free-running starts capture.
Pressing this key during capture stops capture.
<USB Drive Mode>
In USB Drive Mode, the internal memory is recognized by the PC as external storage media.
Files on the internal memory, being recognized as a removable disk, can be easily transferred, deleted, or otherwise handled.
Use a USB cable to connect the MT100 and a PC.
While pressing the MT100 START/STOP key, turn the power ON.
The external storage media is recognized by the PC and data exchange becomes possible.
(The screen is shown in the following figure.)
(7) ENTER
This key is used to finalize setting items during menu configuration or open submenus.
keys).
Specify input signal-related settings.
AMP
Specify capture-related settings.
DATA
Specify trigger and alarm settings.
TRIG
Specify screen display settings.
DISP
Specify mark-related settings.
MARK
Specify file-related settings.
FILE
USER
Specify setting conditions for each user of the MT100.
I/F
Specify interface-related settings.
OTHR
Specify miscellaneous settings.
CAUTION
To exit USB Drive Mode, turn the power off and then on.
When the MT100 is used in USB Drive Mode, no user operation
is allowed, including data capturing and data replay.
keys).
Input, range, filter, etc.
Sampling interval, file name, statistical calculation, etc.
Capture start and stop conditions, alarm conditions, etc.
Scrolling direction, waveform color, etc.
Mark text setting, mark display execution, etc.
Setting conditions, bitmap, file operations, etc.
User name, user switching, etc.
USB ID number, LAN IP address, etc.
LCD brightness, language, AC line frequency, etc.
34
Advertisement
Table of Contents
