Removing The Chassis Cover - DFI KS070-BT Installation Manual

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 8 mounting screws on the rear side of the system are used to
secure the cover to the chassis. Remove these screws and put them in a
safe place for later use.
Mounting screw
4. Lift the cover up to open the system.
5. The Mini PCIe and the micro SD slots are readily accessible after
removing the chassis cover.
3
Mounting screw