Table of Contents
Advertisement
15 ELECTRICAL SYSTEM
15.8
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
110
H03749-11
Changing the headlight bulb
H03753-10
F00361-10
–
Secure the headlight mask with rubber straps
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Turn protection cap
together with the underlying bulb
socket counterclockwise all the way and remove it.
–
2
Pull bulb socket
of the position light out of the reflector.
–
3
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1 / Sockel PX43t) (
–
Insert the protection cap with the bulb socket into the reflec-
tor and turn it clockwise all the way.
Info
Ensure that O-ring
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
3
.
p. 111)
p. 108)
.
p. 142)
4
is seated properly.
p. 109)
p. 111)
Advertisement
Table of Contents
