15 ELECTRICAL SYSTEM
15.8
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
110
F00342-10
Changing the headlight bulb
F00343-10
F00361-10
https://www.motorcycle-manual.com/
–
3
Position brake line
and wiring harness
line guide.
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Turn protection cap
together with the underlying bulb
socket counterclockwise all the way and remove it.
–
2
Pull bulb socket
of the position light out of the reflector.
–
3
Pull out headlight bulb
–
Insert the new headlight bulb.
Headlight (HS1/socket PX43t) (
–
Insert the protection cap with the bulb socket into the reflec-
tor and turn it clockwise all the way.
Info
Ensure that O-ring
–
Insert the bulb socket of the position light into the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
4
in the brake
p. 111)
p. 109)
.
p. 142)
4
is seated properly.
p. 109)
p. 111)