Honda HRM 520 Owner's Manual page 68

Maintenance procedures
Checking the docking station
Check the docking station for problems.
Docking station
Connectors
Screw
Docking station
Locate both rear wheels of the lawnmower
1
at the highest position of the docking
station.
Check if there is a gap between the
2
docking station's charging plug and the
lawnmower's charging socket. If there is
not, adjust the docking station.
66
Check item(s)
Damage to the docking
station
Loosened connectors of the
docking station
Check item(s)
Gap between the docking
station's charging plug and
the lawnmower's charging
socket
Action
Visually inspect the docking station.
If it is damaged, consult your dealer.
Visually inspect the connectors.
If they are loose, consult your dealer.
Charging plug
Action
Check if there is a gap between the docking
station's charging plug and the lawnmower's
charging socket. If there is not, adjust the
docking station.
Rear wheel
Set the rear wheel to the highest position of
the docking station.
Correct
Gap
Incorrect
No Gap