Honda HRM 520 Owner's Manual page 23

Select [Yes] or [No] to the question of the test result
6
3-
and press H button.
If you select [Yes], go to step 3-7.
If you select [No], the message "Do you want to modify
the start point?" is displayed and you can modify the
start point settings.
NOTE:
- For details on the start point settings, see step
2-3 of "2. Setting the mowing start points" (M
page 19).
Close the control panel cover.
7
3-
The lawnmower returns to the docking station.
When the lawnmower is docked at the docking
8
3-
station, press the manual STOP button.
The control panel cover pops up.
Select [Yes] or [No] to the question of the test result
9
3-
and press H button.
If you select [Yes], Mowing start points screen is
displayed to configure the start point settings.
If you select [No], go to step 3-10
After the start point test, select [NEXT] and press
10
3-
the H button.
The setup wizard top screen is displayed and [3.Test
start points] is checked.
NOTE:
- If you want to test the start points once, select
this menu again. You can test the start points
through the setup wizard.
Setting up the lawnmower
Te s t s t a r t p o i n t s
Te s t r e t u r n h o m e
Ye s
Te s t s t a r t p o i n t s
D o y o u w a n t t o m o di f y t h e
s t a r t p o i n t ?
Ye s
Te s t s t a r t p o i n t s
P o i n t / ( 0 - 4 0 0 m )
1 / 8 0 m
2 / 1 5 0 m
3 / 6 0 m
4 / 0 m
5 / 0 m
0 H o m e
N o
N o
5 / 7
N E X T
21