Honda HRM 520 Owner's Manual page 20

Setting up the lawnmower
Select [Clockwise(CW)] or [Anticlockwise(ACW)]
3
1-
referring to the layout of your docking station and
boundary wire, and press the H button.
Select [NEXT] and press the H button.
4
1-
Enter the values of the boundary wire length and
5
1-
garden size.
NOTE:
- For details on the boundary wire length or
garden size, contact your dealer.
- Input the boundary wire length exactly because
the values which are automatically configured
are associated with the boundary wire length.
Select [NEXT] and press the H button.
6
1-
Confirm the boundary wire connection of the
7
1-
docking station terminals with the displayed image.
Select [OK] and press the H button.
NOTE:
- For detail, see "Conditions for installing the
docking station" (M page 12).
Select [Yes] or [No] to the question on the narrow
8
1-
passages, and enter the values of the minimum
passage width from 100 to 300.
Select [NEXT] and press the H button.
9
1-
The configuration of garden layout is completed.
The setup wizard top screen is displayed and [1.Garden
layout] is checked.
NOTE:
- If you want to change the settings in this setting,
select this menu again. You can modify the
settings through the setup wizard.
- Confirm the following settings
Homing setup - Passage width
Start point setup - Passage width
- Input the narrow passage of Garden correctly.
Be sure to test the settings because the
lawnmower automatically set the passage width
of departure and the return.
18
G a r d e n la y o u t
Docking direction
C lo c k w is e ( C W )
A n t i cl o c k w is e ( A C W )
G a r d e n la y o u t
Boundary wire length
_ _ _ _ m ( M A X 8 0 0 m )
G a r d e n s i z e
2
_ _ _ _ m ( M A X 3 0 0 0 m
G a r d e n la y o u t
S t a t io n c o n n e c t o r
G a r d e n la y o u t
Are there
narrow passages?
Ye s N o
W h a t i s t h e m i n i m u m
p a s sa g e w id t h ( w i r e t o w ir e )
_ _ 0 c m
( 1 0 0 - 3 0 0 c m )
1 / 7
N E X T
2 / 7
2
)
N E X T
2 / 7
O K
3 / 7
N E X T