Abr Threshold Results - Interacoustics Eclipse Additional Information

Eclipse Additional Information
Type of measurement:
Stimulus Ear:
Filter properties:
Stop criteria:
Recording:
Display:
There are protocol differences on:
Stimulus properties:
Stop criteria:
Recording:
Display:
Wave reproducibility:
Note All default parameters can be changed if needed.
For information about the test procedure please refer to the relevant quick guide.

3.12.2 ABR Threshold Results

This is an example for a Threshold determination using CE-Chirp LS for the left ear. In the given case the
threshold is 10 dB nHL.
ABR-30
Insert phone
LP: 1.5 kHz/12dB/oct
HP: 33 Hz/6dB/oct
Residual noise ≤ 40nV
Optimize recording Bayesian weighting
Rejection level ± 40µV
Split Screen enabled
Multiple Waveform Markers disabled
Stimulus type (CE-Chirp® LS, NB CE-Chirp® LS, Click and Tone Burst)
Stimuli rate (45.1, 35.1)
Fmp range is set individually for each threshold frequency.
Set individually for each threshold frequency.
Choose to show Polarity
Changes depending of the selected stimulus and frequency.
Page 69