Dantherm CDP 50 Service Manual page 43

Installer menu
Fan set point.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to con rm.
Service interval
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Press to con rm.
Press and hold for 5 seconds to enter installer menu.
When the extractor fan icon ashes at 0.5 Hz and extractor fan set point value is shown on info line.
Left or right button to decrease or inrease value. Enter to con rm set point and go to next icon.
If you do not con rm change, the new setpoint will not be stored
While ashing, the service interval can be increased by pressing RIGHT Button or decreased by
pressing the LEFT Button.
Maximum 99 Weeks. Minimum is 1 week.
EN
43