Wiring Diagrams - Dantherm CDP 50 Service Manual

EN
Main PCB and wiring diagrams
Overview of PCB connections
USB
Routing of cables for
accessories
from terminal rail to PCB

Wiring diagrams-

Page 327
26
RS485 Ext RH/T
Pull the cable through hole A1 and to the hole A2 to connect to PCB.
The groove B is for use with cable from external RH sensor (not included) as it requires a seperate
groove to avoid interference.
All other cables are to be placed in groove A1-A2
B
Important:
External RH sensor cable only.
Alarm 12VDC
A2
A1
All other cables.
2A