Dantherm CDP 50 Service Manual page 11

General information
Introduction
Manual, part no.
Target group
Copyright
Reservations
Recycling
This topic gives the general information about this service manual and about the
Dantherm CDP and the CDP-T dehumidi er.
Part number of this service manual is 094017.
The target group for this service manual is the technicians who install and maintain the
CDP and CDP 40T-50T-70T dehumidi er.
Copying of this service manual, or part of it, is forbidden without prior written permission from
Dantherm.
Dantherm reserves the right to make changes and improvements to the product and the
service manual at any time without prior notice or obligation.
The unit is designed to last for many years. When the time comes for the unit to be
recycled, it should be recycled according to national rules and procedures to protect the
environment.
The CDP dehumidi ers contain R407C refrigerant and compressor oil.
The compressor must be returned to authorities for disposal according to local regulations.
EN
11