Dantherm CDP 50 Service Manual page 42

EN
User menu
Set points
Dehumidifying set point
Press for 3 sec to enter
user menu setup.
Press to con rm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
Temperature set point
Press for 3 sec to enter
user menu setup.
Press to con rm.
Decrease with 1 unit
Increase with 1 unit
Navigation between icons
Navigation between icons
42
The humidity value and the dehumidifying icon will ash.
The display shows the desired humidity set point.
While ashing, the value can be increased or decreased by pressing Up/Increase or
Down/Decrease button on DRC1.
Press enter to con rm humidity set point and go to next menu page.
The temperature value and the heating icon will ash.
The value displayed shows the desired temperature set point. While ashing, the value can be
increased or decreased by pressing Up/Increase or Down/Decrease button on the DRC1
Maximum: 34 °C, Minimum: 5 °C. Press enter to con rm new set point and go to next menu page.