Records - GE C30 Instruction Manual

RECORDS

6.4.2 RxGOOSE analogs
ACTUAL VALUES  METERING  RxGOOSE Analogs
 RxGOOSE
 Analogs
The C30 is provided with optional GOOSE communications capability. This feature is specified as a software
option at the time of ordering. See the Order Codes section of chapter 2 for details.
The RxGOOSE Analog values display in this menu. The RxGOOSE Analog values are received via IEC 61850 GOOSE
messages sent from other devices.
6.4.3 Transducer inputs and outputs
ACTUAL VALUES  METERING  TRANSDUCER I/O DCMA INPUTS  DCMA INPUT xx
 DCMA INPUT xx

Actual values for each DCmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
ACTUAL VALUES  METERING  TRANSDUCER I/O RTD INPUTS  RTD INPUT xx
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID
6
and the bottom line as the value.
6.5 Records
6.5.1 Event records
6.5.1.1 Enhanced and standard front panels
ACTUAL VALUES  RECORDS  EVENT RECORDS
 EVENT RECORDS

6-12
RxGOOSE Analog 1

0.000

RxGOOSE Analog 32

0.000
DCMA INPUT xx

0.000 mA
RTD INPUT xx

-50 °C
EVENT: XXX

XXX

EVENT: 3

POWER ON
EVENT: 2

POWER OFF
EVENT: 1

EVENTS CLEARED
CHAPTER 6: ACTUAL VALUES
Date and time stamps
EVENT 3
 
DATE: 2000/07/14
EVENT 3

TIME: 14:53:00.03405
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL