GE C30 Instruction Manual page 432
Controller system
Hide thumbs
Also See for C30:
- Instruction manual (480 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (342 pages)
Table of Contents
Advertisement
CONVERT DEVICE SETTINGS
4.
Review the conversion report. The values of all settings that have been defaulted during conversion are not listed in
the conversion report; to find the value of a setting before conversion, inspect the device backup file made before
conversion.
In the example shown here, settings have been reset to factory defaults and several settings are new in firmware
version 7.6 under Settings > System Setup > Switches and Breakers.
8
5.
Change settings in the new file, for example by looking at the original file.
6.
Write the converted file to the device, for example by dragging and dropping from the Offline Window to the Online
Window.
7.
Check settings and operation.
8-6
Figure 8-5: Upgrade settings
Figure 8-6: Conversion report
CHAPTER 8: MAINTENANCE
C30 CONTROLLER SYSTEM – INSTRUCTION MANUAL
Advertisement
Table of Contents
