Performance Verification Test Record - LeCroy AP034 Instruction Manual

AP034 Performance Verification Test Record
This record can be used to record the results of measurements made during the performance
verification of the AP034 Active Differential Probe.
Photocopy this page and record the results on the copy. File the completed record as required by
applicable internal quality procedures.
The section in the test record corresponds to the parameters tested in the performance
verification procedure. The numbers preceding the individual data records correspond to the steps
in the procedure that require the recording of data. Results to be recorded in the column labeled
"Test Result" are the actual specification limit check. The test limits are included in all of these
steps. Other measurements and the results of intermediate calculations that support the limit
check are to be recorded in the column labeled "Intermediate Results."
Permission is granted to reproduce these pages for the purpose of recording test results.
Serial Number: _________________________
Asset or Tracking Number: _________________________
EQUIPMENT USED:
OSCILLOSCOPE
DIGITAL MULTIMETER
HF SINE WAVE GENERATOR
FUNCTION GENERATOR
1
The function generator provides stimulus for making relative measurements. The output amplitude of the generator is
measured with the DMM or oscilloscope in the procedure. Thus, the generator is not required to be calibrated.
AP034-OM-E Rev D
Model: __________AP034_________
Date: _________________________
Technician: _________________________
1
ISSUED: January 2000
3HUIRUPDQFH 9HULILFDWLRQ
MODEL SERIAL
NUMBER
CALIBRATION
DUE DATE
N/A
²