Typical Electrical Characteristics - LeCroy AP034 Instruction Manual

TYPICAL ELECTRICAL CHARACTERISTICS

AP034-OM-E Rev D
Typical characteristics are parameters with no guaranteed
performance. Tests for typical characteristics are not provided in
the Performance Verification Procedure.
Bandwidth, probe only
(–3 dB): DC to 1 GHz
Output Zero: < 3 mV within 30 minutes
Residual Autobalance
Offset: ≤ 100 µV referred to input with X1
Differential Offset
Range: ±1.6 V
CMRR: See Figure 13.
Input Resistance
(each side to ground): 1 MŸ
Input Capacitance
(between inputs): < 0.85 pF (See Figure 1.)
Input Capacitance
(each side to ground): < 1.5 pF (See Figure 1.)
Noise
(referred to input,
10 to 1000 MHz): 35 nV/√Hz (÷1 Attenuation)
Output Impedance: 50 Ÿ QRPLQDO ,QWHQGHG WR GULYH  Ÿ
Harmonic Distortion
rd
3 order distortion: –60 dB below fundamental (200 mV
rd
3 order intercept: +20 dBm (at 100 MHz at output)
AC Coupling LF Cutoff
(–3 dB): 16 Hz (using plug-on AC coupler)
ISSUED: January 2000
6SHFLILFDWLRQV
of autobalance
effective gain
(÷1 Attenuation)
±16 V
(÷10 Attenuation)
±42 V
(÷20 Attenuation)
350 nV/√Hz (÷10 Attenuation)
700 nV/√Hz (÷20 Attenuation)
output, at 100 MHz)
p-p
²