Operator Safety - LeCroy AP034 Instruction Manual

6DIHW\ ,QIRUPDWLRQ

OPERATOR SAFETY

AP034-OM-E Rev D
The AP034 Active Differential Probe is intended to be used only
with instruments that are connected to earth ground through the
input BNC connector. When you are using the probe with an
ADPPS Power Supply Adapter, make sure the adapter is
connected to a BNC connector that is grounded by the test
instrument before connecting the probe inputs to the test circuit.
Do not use the probe in wet or explosive atmospheres. Remove
any contamination from the probe housing before connecting the
probe inputs to any circuit. Make sure that the surface of the
probe head is completely dry before connecting the inputs.
Use of the probe, and/or the instrument it is connected to, in a
manner other than that specified may impair the protection
mechanisms.
Do not use the probe if any part is damaged. All maintenance
should be referred to qualified service personnel.
# # #
ISSUED: January 2000
6DIHW\ ,QIRUPDWLRQ
²