Attenuator Matching And Final Check - LeCroy AP034 Instruction Manual

I. Attenuator Matching and Final Check
AP034-OM-E Rev D
1. Repeat the Performance Verification procedure to ensure
compliance with the warranted specifications.
2. Perform the Attenuator Matching Procedure listed on page
5-8. Apply calibration seals in accordance with your quality
procedures.
This concludes the
Performance Verification procedure to complete the calibration of
the AP034.
# # #
ISSUED: January 2000
$GMXVWPHQW 3URFHGXUH
Adjustment Procedure. Repeat the
²