Performance Verification Test Record - LeCroy ZS1000 Instruction Manual

Appendix A
Appendix A

PERFORMANCE VERIFICATION TEST RECORD

This record can be used to record the results of measurements made
during the performance verification of the ZS1000 High Impedance
Active Probe.
Photocopy this page and record the results on the copy. File the com-
pleted record as required by applicable internal quality procedures.
The section in the test record corresponds to the parameters tested in
the performance verification procedure. The numbers preceding the
individual data records correspond to the steps in the procedure that
require the recording of data. Results to be recorded in the column
labeled "Test Result" are the actual specification limit check. The test
limits are included in all of these steps. Other measurements and the
results of intermediate calculations that support the limit check are to be
recorded in the column labeled "Intermediate Results".
Permission is granted to reproduce these pages for the purpose of
recording test results.
Probe Model: ZS1000___________________
Serial Number: _________________________
Asset or Tracking Number: _________________________
Date: _________________________
Technician: _________________________
A–1
ZS1000-OM-E Rev C