STANDARD ACCESSORIES
OPTIONAL ACCESSORIES
OSCILLOSCOPE SOFTWARE COMPATIBILITY
AP034-OM-E Rev D
Hard Case
÷10 Plug-on Attenuator
÷20 Plug-on Attenuator
Plug-on AC Coupler
Probe Connection Accessory Kit:
Flex Lead Set (1)
Mini Clip, 0.8 mm (3)
Mini Clip, 0.5 mm (2)
Ground Lead (1)
Offset Pins, Round (4)
Square Pin Header Strip (1)
Manual, AP034 Active Differential Probe Instruction
ADPPS Power Supply
For full control functionality of the probe, the LeCroy oscilloscope
must have software version 8.1.0 or higher loaded. The software
version installed in a LeCroy oscilloscope can be verified by
pressing the S
S
HOW
selecting the System menu choice. The probe can be used with
earlier versions of software; however, probe offset can only be
controlled through the buttons on the probe body. Also, the scale
factor will be displayed incorrectly in some modes.
If required, contact your local LeCroy representative for
information on upgrading the software in your oscilloscope.
ISSUED: January 2000
6SHFLILFDWLRQV
button on the front panel, then
TATUS
# # #
²