Pandora DXL 1090L User Manual page 15

R E M O T E C O N T R O L
AUTOMATIC ENGINE START
The system allows setting up modes of automatic engine start and stop.
Synchronized real-time clock on the remote and base unit and other autonomous
system settings allow many engine start options without needing to have the remote
in command radio range.
Automatic start and engine work conditions programming is done using LCD
remote. Shortly press button to enter
Shortly press button to switch between menu sublevels. Sub-level values are
changed using and buttons.
When changing settings are done, the values should be saved. To do this, proceed
to Send settings sublevel by pressing of
new settings. Changes will be sent to the base unit, it will be confirmed with double
sound signal of the remote.
To exit menu, press and hold button for 1 second.
NOTE: If you have not saved new settings, remote and automatic engine start settings will remain the same
as before.
NOTE: Engine start via temperature is available only if temperature sensor is connected. The sensor
availability depends on the system set.
WARNING! Enable remote start if your local legislations allows driverless
cars to have working engine.
28
PANDORA DXL 1090L SERVICE-SECURITY SYSTEM
«REMOTE START SETTINGS»
menu.
button and press button to save
remote start
R E M O T E C O N T R O L
start
remote start
settings
by time
settings
enabled
remote start
start
remote start
settings
start
start
by time
settings
by time
by time
enabled
enabled
disabled
start
start
start by time
start by time
enabled
by time
by time enabled start time
disabled
disabled
07:30
start
start
by time
by time
start time
disabled
start time
start
disabled
hours
07:30
by temp
07:30
enabled
start time
start time
start
07:30
start
start
by temp
07:30
by temp
by temp
enabled
enabled
disabled
start
start
by temp
start
start
by temp
enabled by temp
enabled by temp
disabled
start temp
disabled
increase
– 20°
start
start
by temp
by temp
disabled
start temp
disabled
work start temp
– 20°
duration
USER MANUAL – 20°
min
20
remote start
start
settings
by time
enabled
start
start by time
enabled
by time
disabled
start
by time
start time
disabled
07:30
start time
start
07:30 minutes
by temp
enabled
start
by temp
start
by temp enabled
disabled
start
by temp
disabled
start temp
decrease
– 20°
start temp
work
– 20°
duration 29
min
20