Table of Contents
Advertisement
Pandora is a brand of Russian Experimental Engineering Factory, a full production cycle
electronics R&D facility. We design and produce car service-security systems for more than 10 years
and have reached a considerable success on our domestic markets – biggest security system markets
in the world. Our systems are made to withstand severe weather conditions and criminal situation of
northern Eurasia.
Pandora DXL-1820L/1830L is a premium car service-security system, built for cars with on-board
voltage of 12V. It is a complex engineering solution which includes car security system, telemetry,
remote and automatic engine start and various service options, all controlled from your OEM key
remote, smartphone or online service. This system is designed to be all-in-one car service and security
solution and requires no additional modules: it includes algorithmic keyless bypass that works with
many popular car models. For even more convenience, it allows remote control over Webasto or
Eberspaecher preheaters – and even sequential use for automatic engine start.
WARNING!
IT IS STRONGLY ADVISED TO HAVE PROFESSIONAL CAR MECHANIC INSTALLING THE
SYSTEM. CERTIFIED INSTALLERS ARE RARE OUTSIDE RUSSIA, BUT ANY CAR ELEC-
TRONICS INSTALLER SHOULD BE ABLE TO INSTALL PANDORA DXL-1820L/1830L
USING INSTALLATION SCHEME IN THIS MANUAL AND ALARMSTUDIO SOFTWARE.
MOST FEATURES ARE HIGHLY DEPENDENT ON COMPETENT INSTALLATION.
OUR SYSTEMS ARE THOROUGHLY TESTED FOR QUALITY, SO IF A FEATURE FAILS
TO PRODUCE EXPECTED RESULTS, MOST LIKELY THE PROBLEM IS IN IMPROPER
INSTALLATION.
It is essential for systems functioning that you read and understand instructions in this manual.
Note that all radio devices are subject to interference, which could affect proper performance.
This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in
temperatures outside -40 to +80
IMPORTANT! Note that this manual describes remote and manual functions for the
most part. Functionality of the system is vast and would require a book-sized manual to
fully describe. Instead we use a handy software named AlarmStudio that functions as both
programming tool and an extended installation & functionality manual. It requires Windows
and can be downloaded at pandorainfo.com
Pandora would like to thank you for choosing our
DXL-1820L/1830L service and security system
C range.
o
Product is in conformity with Electromagnetic Compatibility
Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC
Advertisement
Table of Contents
Related Manuals for Pandora DXL-1820L
Summary of Contents for Pandora DXL-1820L
- Page 1 Our systems are made to withstand severe weather conditions and criminal situation of northern Eurasia. Pandora DXL-1820L/1830L is a premium car service-security system, built for cars with on-board voltage of 12V. It is a complex engineering solution which includes car security system, telemetry, remote and automatic engine start and various service options, all controlled from your OEM key remote, smartphone or online service.
-
Page 2: Table Of Contents
System modules layout Control over system in case of emergency Warranty obligations Installation certificate Control over system via phone Acceptance certificate Changing core settings via phone Warranty card Pandora online information service pandora-on.com and mobile apps Pandora DXL-1820L/1830L service-security system User manual... -
Page 3: General Information
• Built-in integral accelerometer. • CR-2032 battery (not shipped with the system). Car security zones Pandora DXL-1820L/1830L service-security system guards following independent zones: * Availability of this function depends on car make and model Pandora DXL-1820L/1830L service-security system User manual... -
Page 4: Siren Sounds And Turn Light Signals
Faded The system is disarmed or by analog inputs. When arming and disarming original security system, Pandora will be armed and disarmed respectively. The presence of a tag in the radio zone is not required, but at the beginning of motion if the tag is not detected by the system, the engine will be blocked. -
Page 5: Immobilizer Mode
Code immobilizer is a function that allows disarming, disabling blocking and controlling timer phone’ section). When engine is running, base unit of Pandora security system performs a search channels using original car controls (button, lever or pedal). To enter immobilizer code, programmed for immobilizer tags in radio zone. -
Page 6: Control Over System Via Phone
‘+XXXXXXXXXXX’ – the system’s phone number, ‘,’ – pause is a feature of the phone (can be displayed as the ‘P’ , see the instructions of the phone), ‘123*’ – remote engine start DTMF command, Pandora DXL-1820L/1830L service-security system User manual... - Page 7 Contact can be added as a speed dial to any of the free button. To have simple access to engine start Pandora system has function of promptly disabling automatic engine start. function a phone other than the main owner’s phone, create contact in the following format: +XXXXXXXXXXX,1234,123*,297*, where: 1.
-
Page 8: Changing Core Settings Via Phone
THERE ARE ONLY TWO WAYS TO CHANGE THE OWNER’S PHONE NUMBER: Text messages on engine stop 1. VIA PHONE, USING CORE SETTINGS MENU. GSM connection Settings 2. VIA COMPUTER AND PANDORA ALARMSTUDIO SOFTWARE. Text messages on restoring GSM of saving mode connection Money saving mode of the GSM... -
Page 9: Pandora Online Information Service Pandora-On.com And Mobile Apps
After completing of the registration process, you can login to online service via computer’s web 08:24 Engine start browser or via special mobile apps for the Android (Pandora Online) and iOS (Pandora Pro). Only the main functions are available in these apps with DXL-1820L/1830L. 18 of January... - Page 10 Tracking Voice calls sensor door door of the supplementary engine start sensor Enter system Loss Trunk Automatic Siren Text programming of GSM switching on mode receiver connection messages mode connection of the engine preheater Pandora DXL-1820L/1830L service-security system User manual...
- Page 11 MAIN SOCKET INP 2 • IGNITION SWITCH Yellow Purple (+) 2A SIREN (+) Fuse 3A POWER +12V GROUND +12V INP-5 Siren AERIAL OUT-4 Ignition INP-1 OUT-3 OUT-5 CAN2 OUT-2 CAN1 VALET Pandora INP-3 OUT-6 BUTTON INDICATOR DATA TX DATA RX...
-
Page 12: Installation And Configuration Of The System
TX of Pandora wires (this is especially important for the large current circuits). menu of Pandora micro alarm system • Switched connections should be placed as high as it is possible in the cavities so water condensate will not form drops on the switching location. -
Page 13: Wiring Description
The system settings can be changed via computer. The system should be connected to a computer via standard micro-USB cable and a special piece of software – Pandora AlarmStudio. Brake pedal signal is one of the system’s security zones. This input is multipurpose, it can operate in accordance with selected logic. -
Page 14: Configuring System Settings Via The Wireless Interface 2,4 Ghz
To program using a computer connected via cable, you need a standard micro-USB Level 9 Reserved cable, a computer with Windows and a special piece of software – Pandora AlarmStudio. Level 10 Configuring system settings via the wireless interface 2,4 GHz... -
Page 15: Changing Core Settings Using Valet Button
After the input is complete, the indicator fades, the system awaits a new programming level input. Level 8 Recording GPS/GLONASS receiver Enter this level and connect power to the GPS/GLONASS receiver. Siren of the base unit will confirm successful recording with 1 beep. Pandora DXL-1820L/1830L service-security system User manual... - Page 16 LED indicator, after that the system will return to a programming To switch off maintenance mode via validator code: mode. - switch on the ignition; - place the tag in radio coverage zone (if immobilizer/Antihijack is enabled); - enter validator code; Pandora DXL-1820L/1830L service-security system User manual...
-
Page 17: Additional Devices
1. For emergency switching off this function call the system’s number and dial DTMF command 998* and code from the card. Expansion module RMD-8 is designed to be used in conjunction with Pandora DXL-1700L, DXL- 2. This mode can be disabled by entering personal code from the plastic card on level 15 of 1820L/1830L, 3050L and Professional service-security systems. -
Page 18: Glossary Of Terms
Blocking radio relay Glossary of terms For Pandora DXL-1820L/1830L optionally blocking BTR-101 radio relay is available. Blocking radio relay with built-in accelerometer should be placed in the engine compartment. Herewith zone of built-in aerial 2,4 GHz should not be shielded. -
Page 19: System Modules Layout
Ask the installer to mark system’s modules on the picture provided. This information can be important for diagnostics in case system malfunctions. Base unit VALET button Blocking radio relay LED indicator Automatic start module GPS receiver Pandora DXL-1820L/1830L service-security system User manual... -
Page 20: Warranty Obligations
Packaged products should be stored on racks in piles of 6 or less boxes, in enclosed, dry, heated Work accepted________________/___________________________________/ rooms (no less than 1m from heating) which exclude possible interaction with moisture, oil products Signator and damaging environmental factors. Date «____»___________________20___y Pandora DXL-1820L/1830L service-security system User manual... -
Page 21: Acceptance Certificate
Acceptance certificate Pandora DXL-1820L/1830L is in conformity with Electromagnetic Compatibility Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC Serial number ______________________________________________ Date of production _________________________________________________ Responsible person’s signature (stamp) Packager ___________________________________________________ Signature (personal stamp) Warranty card Model Pandora DXL-1820L/1830L Serial number ______________________________________________ Date of purchase «____»...