Table of Contents
Advertisement
ASSEMBLY
Tool:
Multi Hex Tool with
Phillips Screwdriver
STEP 12
12a. Installing the U Shape Bracket Covers –Turn the U Shaped Bracket Covers A/B
(97A,97B) so that the cut outs on the side are facing the Crank (10). Insert the posts of the U
Shape Bracket Covers A/B (97A,97B) into the holes at the rear of the Left/Right Foot Bars
(9L,9R) and enclose the U Shape Brackets (8). Attach the U Shaped Bracket Covers A/B
(97A,97B) around the U Shaped Bracket (8) with four Round Head Self Tapping Screws (59).
Tighten the hardware with the Multi Hex Tool with Phillips Screwdriver until firm and secure.
Note: The screws will insert from above on the left side, and the screws on the right side will
insert from below.
HARDWARE PACK
(59) Round Head Self
Tapping Screw
4 PCS
21
Hide quick links:
Advertisement
Table of Contents
