U Shape Bracket ( - Exerpeutic 1318 Owner's Manual

STEP 10
Note: The parts are marked with an "R" for right side and "L" for left side.
10a. Installing the left side Foot Bar –Slide the U Shape Bracket (8) all the way down
the shaft of the left side of Crank (10). Insert one Hexagon Socket Head Bolt (53), one
Wave Washer (70), and one Washer (71). Tighten the hardware by using the 5mm Allen
Wrench until firm and secure.
10b. Installing the right side Foot Bar – Repeat the same assemble steps for installing
the Right Foot Bar (9R) onto the right side of Crank (10).
(53) Hexagon Socket
Head Bolt
2 PCS
ASSEMBLY
HARDWARE PACK
(70) Wave Washer
2 PCS
19
Tool:
5 mm Allen Wrench
(71) Washer
2 PCS