MSA G1 SCBA Operating Manual page 90

CAUTION!
Do not attempt to charge alkaline battery modules with the charger. Failure to follow this warning may
result in damage to the battery charger.
(1) Place the charger horizontally on a flat surface and in a dust-free
area with a temperature range between 32°F and 104°F (0°C and
40°C). The ideal temperature is 70°F (21°C).
(2) Plug the charger into a 115-120 V, 50, 60 Hz (standard AC outlet).
The charger can be used internationally with the appropriate
adapter up to 240 VAC.
NOTE: The rechargeable battery module is installed on the user side
of the SCBA in the middle of the backplate.
(3) Unlock the rechargeable battery module with the battery removal
tool.
a)Push the removal tool into the slot in the rechargeable battery
module and click into place.
Pull the removal tool and the rechargeable battery module out of
the power module.
(4) Ensure that the rechargeable battery module and charger
connectors are free of water or debris.
(5) Insert the rechargeable
battery module into the
charger, and note the
charging indicator:
Charger LED Indications
Condition
No Battery or Charging Error
Charging
Charge Complete
When the rechargeable battery module is charging, the LED will be
red. When the rechargeable battery module is fully charged, the LED
will be green. The rechargeable battery module can stay connected to
the charger until the battery is needed.
NOTE: In a discharged condition, the rechargeable battery module
may charge for up to 8 hrs. Charging times will vary for rechargeable
battery modules in partial charge states. If the charging LED turns off
while the rechargeable battery module is installed, remove the
rechargeable battery module from the charger, and then insert the
rechargeable battery module back into the charger. If charging does
not resume, the rechargeable battery module may be exhausted or
defective.
G1 SCBA
Maintenance
Indication
Off
Red
Green
US
90