G1 Pass Device - MSA G1 SCBA Operating Manual

Description
2.6

G1 PASS Device

The PASS device on the G1 SCBA is made up of three components: alkaline or rechargeable
battery module, power module, and control module. The PASS device provides the user the ability to
monitor movement through a motion sensor. When a user remains motionless for 30 seconds, the
PASS device goes into full alarm to alert those around the user. The PASS device also monitors
cylinder pressure and battery status.
G1 Control Module
The G1 control module is the user's interface with the SCBA and PASS device.
The control module is assembled to the high pressure air source and to the power module by a pneu-
matics and electronic hose assembly. It is equipped with an analog gauge as well as a graphical
display to provide vital information: numeric cylinder pressure, battery status, alarms and time
remaining (optional).
US
When the control module is being read by the user, no buddy lights on the control module will flash
and a white gauge light will illuminate, to enable the user to read the gauge and display. If the SCBA
is equipped with the optional telemetry module, the radio link status and evacuation alarms are
displayed. The integrated PASS motion sensor is housed within the control module. The ALARM
button of the control module activates the full PASS alarm with or without air pressure.
16
G1 SCBA