Screen Displays During Tagging - MSA G1 SCBA Operating Manual

Niosh cbrn and nfpa 1981/1982 breathing apparatus

Hide thumbs Also See for G1 SCBA:

Table of Contents

9.5

Screen Displays During Tagging

To start the tagging procedure, press and hold BOTH green RESET buttons at the same time until the

RFID symbol appears.

When the device has read the tag, it confirms with a beep.

(2)

When the battery icon is displayed on the screen, press the

ALARM button and RFID symbol will appear.

(3)

Place the ID Tag over the RFID reader on the power module.

The RFID reader is located on the SCBA backplate on the

user's right side.

The control module will display the ID tag information and beep

once complete.

(4)

If the control module does not display the ID tag information,

repeat steps 1 and 2.

RFID screen

Personal ID TAG read

G1 SCBA

Control Module

Table of Contents