To create a new profile, enter its name and tap the DONE
4
button. To use the existing name, tap the DONE button.
Load a Profile
After saving more than one profile, you can scroll through the
list, select a profile, and tap the LOAD button on the PROFILE
screen. After loading a Profile, run AutoTest to obtain test results.
Rename or Delete a Profile
Tap the MANAGE button on the PROFILE screen to rename or
delete a profile.
Export and Import Profiles
To import or export a group of Profiles quickly, use FTP or the
Cloud Service, or map the analyzer's user file system as a network
drive.
See "Remote File Access Using an FTP Client" on
page 216.
See "Remote Access from the Cloud" on
See "Remote File Access Using a Mapped Network Drive
(WebDAV)" on
To export a profile to a different OneTouch AT 10G analyzer
using a USB flash drive:
Connect a USB flash drive to the analyzer. (You must do this
1
before tapping the MANAGE button in step 3 so the USB flash
drive will appear on the list.)
2
Tap the Profile name, which is in the shortcut bar at the top of
the screen.
3
Tap the MANAGE button.
4
Select the profile to export.
page 217.
Chapter 6: Profiles
Load a Profile
page 230.
141