Chapter 2: Setup Wizard; Setup Wizard; Working With The Setup Wizard - Netscout OneTouch AT 10G User Manual

Before you use the analyzer, read the safety
information that starts on page 15.
This chapter helps you quickly begin using the OneTouch
analyzer.

Setup Wizard

The Setup Wizard, which appears when you initially power on the
OneTouch AT analyzer, guides you through these tasks:
Registering the product, which gives you access to valuable

information about product updates, troubleshooting tips,
and other support services
Setting up the Link-Live Cloud Service, which extends the

analyzer's network testing capability
 Configuring the analyzer's settings and tests, which
prepares the analyzer to run an informative AutoTest

Working with the Setup Wizard

The Setup Wizard will prompt you to register the analyzer until
you have done so.
If you want to skip the Setting Up the Cloud Service or Configuring
the Analyzer's Settings and Tests task, select the "Don't show me
this again" check box at the beginning of the section.
At the beginning of each section, a Yes/No toggle control
is displayed.
Keep the default selection (Yes), and tap the NEXT button

to complete the section.
Select No and tap the NEXT button to skip the section.


Chapter 2: Setup Wizard

 
Warning
41