Table of Contents
Advertisement
OneTouch AT 10G
User Manual
Power Connector - Connect the supplied AC adapter to a power
source and to the OneTouch analyzer. See "AC Adapter and
Battery" on
AC Power Indicator - This LED is red while the battery is
charging; green when fully charged.
Headphone Jack - You can connect headphones to hear audio
indicators when they occur.
USB-A Connector - Used to manage files on a USB storage
device such as a flash drive. See Chapter 10: "Managing Files,"
beginning on
adapter which provides a Wi-Fi management port. See
"Management Port" on
Many USB flash drives have an LED on the front. Note that the
USB flash drive is inserted into the OneTouch analyzer with the
back of the flash drive facing the front of the analyzer.
You do not need to software-eject a USB storage device before
removing it. Wait for the analyzer to stop writing to the device,
then physically remove it. USB keyboard operation is supported
on the port; mouse operation is not.
Micro-USB Connector - This connector is reserved for future use.
24
page
17.
Figure 5. Right Side View
page
209. Also used to connect to a USB Wi-Fi
page
192.
GVO007.EPS
Advertisement
Table of Contents
Need help?
Do you have a question about the OneTouch AT 10G and is the answer not in the manual?