Chapter 3: Basic Operation; Adding User Tests; Add A Tcp Test To The Home Screen - Netscout OneTouch AT 10G User Manual

Before you use the analyzer, read the safety
information that starts on page 15.
This chapter provides instructions for:
Adding a User Test to the HOME screen (detailed instructions)

 Connecting to a network
Running AutoTest and viewing the results

Using and customizing the HOME screen


Adding User Tests

User tests are tests that you create to test specific functionality of
your network.
The following example explains how to add a Connect (TCP) user
test to the HOME screen. Other user tests can be added by
performing similar steps.
You can also add user tests from a Wired Analysis screen as
described in "Wired Analysis Tools" on

Add a TCP Test to the Home Screen

You can add user tests to any of the three tiers on the HOME
screen. The tiers provide a framework for you to organize the
tests according to the network's structure.

Chapter 3: Basic Operation

 
Warning
page 155.
49