Number Format; Units For Length Measurements; Timeout Periods (Power-Down And Backlight) - Netscout OneTouch AT 10G User Manual

Tap the setting you want to change:
3
To set the date, tap Date. Tap <left arrow> or <right arrow>

to select a month and year for the calendar, then select the
correct date on the calendar. Tap DONE to save your settings.
To set the time, tap Time. Tap <up arrow> or <down arrow>

to increase or decrease the setting for hours, minutes, and
seconds. Tap DONE to save your settings.
To set the date format, tap Date Format, then select a format

for the day (DD), month (MM), and year (YYYY). Note that the
date format used in file naming of reports, screen shots,
packet captures, etc. is based on the language setting. See
"Language" on
To set the time format, tap 12 hr or 24 hr to use a 12-hour

clock or a 24-hour clock.
If you remove the battery and do not connect the AC
adapter, the clock keeps the current date and time for
a minimum of 24 hours.

Number Format

The analyzer can show decimal fractions with a decimal point
(0.00) or a comma (0,00).
On the HOME screen, tap TOOLS
1
Scroll down to the Maintenance Tools section and tap 0.0 or
2
0,0 on the Number button.

Units for Length Measurements

On the HOME screen, tap TOOLS
1
Scroll down to the Maintenance Tools section and tap ft for
2
feet or m for meters on the Length button.

Timeout Periods (Power-Down and Backlight)

To increase battery operating time, the analyzer can turn off the
backlight and/or automatically power down when you do not
press any keys for a specified period.
page 38.
Note
Chapter 1: Get Acquainted
Set Preferences
.
.
39