Table of Contents
Advertisement
OneTouch AT 10G
User Manual
Note that the file will not appear in the file manager's file list if it
does not have the correct extension.
Profiles must have the .profile extension,
reports must have the .pdf extension, and
screens must have the .png extension to be displayed in the file
list. You can import other file types but they will not be displayed
in the file manager's list.
Remote User Interface and File Access
You can access the analyzer remotely when you connect to its
management port.
Remote viewing of the OneTouch analyzer's user interface is
possible a VNC client connection and in the
Service". To remotely access the file system, connect via Link-Live,
FTP, or a mapped network drive (WebDAV). You can set up
remote access security by configuring the OneTouch analyzer's
management port.
For more information on accessing and remote
controlling your OneTouch in Link-Live, see Chapter
13: "Link-Live Cloud Service," beginning on
User Interface Remote Control
Connect Using a VNC Client
To connect to the analyzer using a VNC Client:
1
Obtain the IP address of the management port as described
on page 192.
Provide the analyzer's management port IP address to your
2
VNC client.
Connect using your VNC client.
3
214
"Link-Live Cloud
Note
page
339.
Advertisement
Table of Contents
Need help?
Do you have a question about the OneTouch AT 10G and is the answer not in the manual?