Set Up An R3000 To Be A Target Server - 8e6 Technologies R3000IR User Manual

G A
LOBAL DMINISTRATOR
142
S C 1: S
ECTION HAPTER

Set up an R3000 to be a Target Server

An R3000 configured to be a target server will receive
profile/library setting changes from the source server only.
WARNING: If an R3000 server is set up in the Target mode with a
NAT device between the target and source server, be sure that
ports 26262 and 26268 are open on the target server. This setup
is required so that the target server can communicate with the
source server.
For the Target mode setting:
1. In the Mode frame, click "Target" to display the Target
mode view:
Fig. 2:1-55 Setup window, Target mode
YSTEM SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE