Table of Contents
Advertisement
1
About the Instrument
Table 1-2. Recommended Accessories for Agilent Switches/Attenuators
(Cont'd).
Reference
Attenuator
Document
Model
Number
84904K - L
84906K - L
5963-6944E
84907K - L
84904M
84905M
5988-2475EN
84908M
8494G - H
8495G - H
8496G - H
(4)
8495K
8497K
(1) Product and technical overviews for the attenuators listed can be obtained by document number from the Agilent RF & Microwave Test Accessories
web site. Go to http://www.agilent.com/find/accessories, select 'RF & Microwave Test Accessories', and search for the document number.
Additional information can also be found in the "RF and Microwave Test Accessories Catalog" accessible from this site.
(3) These cables must be assembled to their connectors. Cable assembly instructions are provided in this chapter.
(4) Information on these attenuators plus additional information on the other attenuators can be found in the "RF and Microwave Test Accessories
Catalog" accessible from this site.
Y1157A - Y1159A Cable Assembly
Three cable kits are available for connecting switches and attenuators to the
Y115xA distribution boards:
Y1157A
Y1158A
Y1159A
The cable kits used with each switch/attenuator and distribution board are
identified in Table 1-2.
6
Coil
Position
Voltage
Indicator
(1)
Option
Option
24V
standard
(standard)
024
standard
24V
standard
(standard)
Agilent 34945A Microwave Switch/Attenuator Driver Module User's Guide
Distribution Board
DC Connector
(number of
Option
attenuators per
board)
10-pin DIP
Y1153A (2)
(standard)
10-pin DIP
Y1153A (2)
(standard)
12-pin Viking
Y1153A (2)
(standard)
(3)
(Cable Kit)
Y1158A
Y1158A
n/a
Advertisement
Table of Contents
