Table of Contents
Advertisement
3
Software Installation and Configuration
GPIB interface present
Figure 3-6. Adding Instruments to the GPIB Interface.
Adding Instruments to the GPIB Configuration
In the Connect Expert window, select "Add Instrument" on the tool bar. Select
the GPIB interface in the "Add Instrument" window and click 'OK' (Figure
3-6).
In the 'New GPIB Instrument' window, select the 34980A's GPIB address
(note: factory-set address = 9) and click 'OK'.
Connection Expert will attempt to establish a communication path to the
instrument. If the 34980A is at the address specified, the instrument will be
added to the list of GPIB-configured instruments.
Agilent 34945A Microwave Switch/Attenuator Driver Module User's Guide
47
Advertisement
Table of Contents
