Table of Contents
Advertisement
5
Additional Operating Information
Y1150A - Y1155A Switch Control Tables
The following tables relate switch control actions 'open' and 'close' to the state
of the switch and attenuator. The tables are identified by distribution board.
Y1150A Switch Control
The switch control for the Y1150A distribution board is shown below. All
channels are driven in the PAIRed mode (Preset state). See Figure 4-10 for
additional information. See Chapter 2 for bank-specific channel numbering.
Y1151A Switch Control
The switch control for the Y1151A distribution board is shown below. All
channels are driven in the single (un-paired) mode (Preset state). See Figure
4-11 for additional information. See Chapter 2 for specific channel numbering.
94
Channel / Switch
Channel 1xx1 / SW1
Channel 1xx2 / SW2
Channel 1xx3 / SW3
Channel 1xx4 / SW4
Channel 1xx5 / SW5
Channel 1xx6 / SW6
Channel 1xx7 / SW7
Channel 1xx8 / SW8
Channel / Switch 1
Channel 1xx1 / SW1 Path 1
Channel 1xx2 /SW1 Path 2
Channel 1xx3 /SW1 Path 3
Channel 1xx4 /SW1 Path 4
Channel 1xx5 /SW1 Path 5
Channel 1xx6 /SW1 Path 6
Channel 1xx7 /SW1 Open All 1
Channel 1xx8 /SW1 Open All 2
Agilent 34945A Microwave Switch/Attenuator Driver Module User's Guide
Switch State
State A
ROUT:OPEN (@1xx1)
ROUT:CLOS (@1xx1)
ROUT:OPEN (@1xx2)
ROUT:CLOS (@1xx2)
ROUT:OPEN (@1xx3)
ROUT:CLOS (@1xx3)
ROUT:OPEN (@1xx4)
ROUT:CLOS (@1xx4)
ROUT:OPEN (@1xx5)
ROUT:CLOS (@1xx5)
ROUT:OPEN (@1xx6)
ROUT:CLOS (@1xx6)
ROUT:OPEN (@1xx7)
ROUT:CLOS (@1xx7)
ROUT:OPEN (@1xx8)
ROUT:CLOS (@1xx8)
Path Closed
ROUT:CLOS (@1xx1)
Close another path or open all
ROUT:CLOS (@1xx2)
Close another path or open all
ROUT:CLOS (@1xx3)
Close another path or open all
ROUT:CLOS (@1xx4)
Close another path or open all
ROUT:CLOS (@1xx5)
Close another path or open all
ROUT:CLOS (@1xx6)
Close another path or open all
ROUT:CLOS (@1xx7)
note: use either channel
ROUT:CLOS (@1xx8)
State B
Path Open
to open all
Advertisement
Table of Contents
