Table of Contents
Advertisement
3
Software Installation and Configuration
About IP Addresses and Host names
Dynamic Host Configuration Protocol (DHCP) and Automatic IP are enabled
on the 34980A when shipped from Agilent. This allows the instrument to auto-
matically obtain an address on the network. If there is a DHCP server on the
network, the server will assign the address to the instrument.
If there is not a DHCP server on the network, the 34980A will automatically
determine the address to use. The address will be in the range 169.254.1.1 to
169.254.255.255. If available, the instrument will try to acquire its default set-
ting of 169.254.9.80.
Host Names The 34980A has a default host name. The format of the host name
is:
A-34980A-yyyyy
where 'yyyyy' are the last five digits of the instrument's serial number.
The instrument host name is reported by Agilent Connection Expert for net-
44
Click to add selected instrument
to the configured interface
Figure 3-5. Instruments Found on a Local Subnet.
Agilent 34945A Microwave Switch/Attenuator Driver Module User's Guide
Advertisement
Table of Contents
