Nameplate; Delivery; Scope Of Delivery; Storage - Otto Bock Invader 480S26-20000_K Instructions For Use Manual

Delivery

Hazards due to fire, heat and cold
CAUTION
Extreme temperatures
Hypothermia or burns through contact with components, failure of components
► Do not expose the product to any extreme temperatures (e. g. direct sunlight, extreme cold).
Hazards due to improper use of the product
NOTICE
Use under incorrect environmental conditions
Damage to product due to abrasion
► Avoid sand or other particles that may damage the wheel bearings.
NOTICE
Overloading
Damage to the product due to overloading
► Do not exceed the maximum load capacity (see the section "Technical Data").
► Please note that certain options and add-on components (e.g. a backpack) will reduce the remaining load
capacity.

4.3 Nameplate

Label
The nameplate can be found on the frame
5 Delivery

5.1 Scope of Delivery

The wheelchair is delivered preassembled and with the rear wheels removed packed in a crate.
The scope of delivery includes:
• Preassembled wheelchair
• 2 rear wheels
• Options according to the order
• Instructions for use

5.2 Storage

The wheelchair packaging should be saved in case transportation is subsequently required.
The wheelchair must be stored in a dry place. An ambient temperature between -10 °C and +40 °C must be main­
tained.
Tyres contain chemical substances that can react with other chemical substances (such as cleaning agents, acids,
etc.).
10 | Ottobock
A Type designation
B Article number
C Maximum load capacity (see section "Technical Data")
D Manufacturer information, address, country of origin
E Serial number/manufacturing date
F European Article Number/Global Trade Item Number
G Read the instructions for use before using the product.
H CE marking – product safety in accordance with EU directives
I
The product has not been approved by the manufacturer for use
as a seat in a wheelchair accessible vehicle
Meaning
Invader 480S26=20000_K