Changing The Device Name; Resetting The Zypermx - ZeeVee ZyPerMX User Manual

Changing the Device Name

By default, the ZyPerMX is automatically assigned a name by combining the string "ZyPerMX"
and the MAC address of the ZyPerMX. This name can easily be changed to something more
descriptive using the procedure below.
1. Login to the Maestro web interface. See
information.
2. Click the Device tab.
3. Enter the desired name in the Device Name field.
4. Click the Apply button to save the changes or click the Reset button to cancel changes and
revert to the previous settings.
Basic Operation
The Maestro Web Interface (page 4) for more
14

Resetting the ZyPerMX

The ZyPerMX can be reset to factory-default settings by clicking the Default button under
the Device tab or by pressing the reset button on the rear panel of the unit. When the
ZyPerMX is reset to factory-default settings, the IP address will be reset to 192.168.1.10
and will be set to Static mode.
► Using Maestro
1. Login to the Maestro web interface. See
more information.
2. Click the Device tab.
3. Click the Default button, under Actions.
4. The following dialog will be displayed, prompting to confirm the reset procedure.
5. Click the OK button to reset the ZyPerMX to factory-default settings. Click the Cancel
button to return to the Device tab.
Basic Operation
The Maestro Web Interface (page 4) for
15