Callback - MAXINCOM MUC1004 Administrator's Manual

caller.
Muisc on Hold Music (or Commercial) played to the caller while they wait in
Class
line for the conference to start.
Quiet Mode Quiet mode (do not play enter/leave sounds)
User Count Announce user(s) count on joining conference
User join/leave Announce user join/leave
Leader Wait Wait until the conference leader (admin user) arrives before
starting the conference.

3.7.7 Callback

PBX allows caller A to dial an inbound route number, and after hearing the ring,
A can hang up the call or wait for PBX to cut off the call, then PBX will call A with
this number. When A picks up the call, A can dial the number he wants to call;
PBX will call the number with its outbound route.
Notes:
1. If you‟d like to use callback feature, please make sure it‟s enabled on the
inbound route setting panel.
2. No callback rules needed to be set if the trunk supports call back with the
caller ID directly.
Follow the steps below to use this function.
Step 1: Enable Callback.
Inbound Routes—Choose "Yes" on" Enable Callback" to enable this function.
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Figure 3.7.7 Callback
75 / 112