MAXINCOM MUC1004 Administrator's Manual page 37

Table 3.6.1.1c Description of FXS Extensions Options
Parameters
This function sets inbound call forwarding on an extension.
Call Forward
An administrator can configure Call Forward for this
(Follow Me)
extension.
Rxgain: The Volume sent to FXS extension.
Volume Settings
Txgain: The Volume sent out by the FXS extension
 Mobile Num: if you set a mobile number as mobility
Mobility
extension,while you call in PBX with this mobile number, the
Extension
mobile phone will get all permission of the associated
extension.for example: dialing the extension, playing the
voicemail.

extension,your mobile phone will ring together,what you
need is set outbound route and set Outbound Prefix number.
The absolute maximum amount of time permitted for a call,it only
Maximum Call
valid for outbound calls
Duration
Number of seconds to ring prior to going to voicemail.
Ring Time
Check this option if the extension should have Call Waiting
Call Waiting
capability. If this option is checked, the "When busy" follow
me options will not be available.
Pinless Dialing will allow this extension to bypass any pin codes
Pinless Dialing
normally required on outbound calls
Call group for peer/user
Call Group
If this extension belongs to a pickup group, any calls that
Pickup Group
ring this extension can be picked up by other extensions in
the same pickup group by dialing the Call Pickup feature
code(the default is *8).
Note: *8 is the default setting, it can be changed under
Feature Codes -> General -> Call Pickup.
Do Not Disturb
Do Not Disturb
Http://www.maxincom.com
MUC1004/2008/2016 Administrator guide
Description
Enable RingAll: when someone calls the associated
37 / 112